Tuesday, November 2, 2010

4 Dollar Headlamp!

I was at the dollar store today and saw something I knew my kids already had, a cheap head-mounted LED light. Ever since I saw my kids' I had been wanting to try strapping one to my helmet, and today was the glorious day.





$2. How could I resist? Another $2 got me two sets of AAA batteries for it. It came with elastic straps for placing it on your head that actually worked pretty well. My helmet wouldn't sit properly wearing the light that way. I wanted to attach it to my helmet anyway, so I took the straps off.




I was left with this cute little Star Wars lookin' thing:


The black dot is a push button that lets me choose 1, 3, or 7 LED operation. For something so cheap, it is reasonably bright, certainly comparable with most of the "be seen" lights in the $20 range, plus the hinged design allows me to adjust its vertical angle.






Its base was a nice size and had a foam pad on it, intended for your forehead. I considered velcro, but thought that it may work itself loose. I love zip-tying things, but didn't want those plastic edges inside my helmet (although I doubt they would have bothered me). I was also hoping to keep this the cheapest light ever. The straps that came with were elastic and soft, so I just pulled a Gilligan and lashed it to my helmet with the shorter of the two.



It is actually attached very firmly and I don't think I left any way for it to unravel. Inside the helmet, just some soft cloth:


I've always wanted a helmet mounted light that would shine where I looked. $4 and 15 minutes went into getting this one! Now the question is whether this Dollar Store Crap will stop working right away or not. My kids' lights have lasted really well, so I have high hopes.



To anybody who ever doubted my total coolness, I say, "LOOK AT ME NOW"! I've got Dollar Store Crap strapped to my head and I'm happy about it. Case closed. I am infinitely awesome.



Keep burning brightly, everybody.

R A N T W I C K

Monday, November 1, 2010

Trek 520 Build - Part Seven - Roadworthy

This is Part Seven in an ongoing series of posts documenting my painfully slow progress in building a light loaded touring bike. If you care to read the whole thing so far, use the "Post Series" link near the top of the sidebar.

Well, it has been a long time since I posted on my progress with the 520, partly because I have been very busy and partly because I haven't really gotten very far. That said, the bike has crossed the line that exists between idea/project and functioning machine, and some good things have definitely happened. When I left off in the last part, the bike's foundation was together, but the more complex components weren't on it yet.




The first order of business was cleaning all the old parts. I prefer to dismantle things about as far I reasonably can, getting every last bit of old grease and grit out of them. Something like a derailleur is easy enough to take apart and put back together (at least the parts you should), but the cantis from this bike frightened me a little when taken fully apart:




I managed to get them back together OK after studying pictures and diagrams online and footling about for a while...



More on brakes later. Once I had brakes, I slapped on cables, derailleurs, a chain and all that. I am pleased and surprised to say that all went very easily and I spent very little time bemused or puzzled. This was rather new to me.

The old components, while less than pristine, cleaned up pretty well, and the new stuff looked, um, new!










The moment of truth had arrived. I had tuned everything as best I could. It was time to ride it. I set out with a few tools in a backpack so I could adjust seat height and such along the way.

The test ride went great! Other than tweaking handlebar and seat height a little, everything worked. I was particularly pleased with the shifting, which was smooth in both indexed and friction, and it would seem I got the limiting screws set correctly the first time. I rode the bike to work a couple of times and I recalled why I like racks and panniers over backpacks. Anyway, that produced the desired "cable stretch" and I've re-tuned things since.

The brakes, while sufficient, are a bit of a let-down. I have fiddled and adjusted and tuned myself insane, but they still haven't got the power I'm after. I am strongly considering some Tektro 520s like the ones on my fixed gear. They have been great and are about a million times easier to install and adjust and use modern cartridge style pads. The current brakes will do for now though, because I have to abandon work on the 520 to get Mutant Winter in shape before the snow flies.

Besides, the 520, while functional, is not finished and other things matter more than new brakes. Still on my list, in order of importance:

1 - Racks

2 - Fenders

3 - Bar Tape

4 - Stickers/decals

5 - Headbadge


While getting the headbadge back on the bike will be relatively quick and easy, in my mind it is the very last thing, the finishing touch. I will be back with another instalment on the Trek when I manage to get anything more done. Don't know when that'll be. I mean, I got the frame in August of 2009. That should give you an idea of the quickness with which I work.

Thanks for tuning in, whether its your first time or, god help you, you come here often. I really appreciate it.

R A N T W I C K
PS - I almost forgot about the money again!

Build $ Tally:

Used Frame + some parts I will re-use: $80
Used Wheelset front wheel: $100 (arg!)
Blasting of frame: $50
Powder Coating of frame: $50 (super deal)
Components from Part Four: $246
Taxes and Duties on shipment: $40
14-34 Freewheel: $22
New Rear Wheel: $62

Cables and Tubes: $30

TOTAL to date: $680